img
1997 - Anter 750
Straight Line Crash lock 4 & 6 corner Gluer For the manufacture of cut and creased carton board cartons from 200 to 600 gr/m2 Pafra Electronic Glue System Max Carton blank 750mm Min Carton blank 106mm Max Carton length 650mm Min Carton width 60mm
1998 - Anter 1100
Straight Line, Crashlock & 4 Corner Cartons Max Carton blank 1100mm Minimum open box width: 106 mm Minimum open box length: 1100 mm Maximum open box length: 850 mm Maximum open box width: 1100 mm Maximum Folded Box Thickness 15 mm Cardboard and corrugated cardboard, from a maximum weight of...
img
2006 - Bobst Mistral 110 A2
Max. blank width 1100 mm Min. blank width 126 mm Max. blank length 800 mm Min. blank length 60 mm All technical equipment for straight-line, Crash Lock 4- and 6-point gluing. It also have two Bobst Wonderfoil modules for special gluing Equipped with latest HHS hotmelt System Xtrend– 7 gun...
img
0 - Bobst PCR 880
Maximum Carton Blank Width ( Un Folded) 880 mm Minimum Carton Blank Width ( Folded) 425 mm Maximum Carton Blank Length 900 mm Minimum Carton Blank Length 60 mm Maximum Speed 300 Meters Minute For production of simple side seam cartons. Belt feed from bottom of pile, and feed gate wit...
img
1974 - Bobst PCR 880
Maximum Carton Blank Width ( Un Folded) 880 mm Minimum Carton Blank Width ( Folded) 425 mm Maximum Carton Blank Length 900 mm Minimum Carton Blank Length 60 mm Maximum Speed 300 Meters Minute For production of simple side seam cartons. Belt feed from bottom of pile, and feed gate wit...
img
1995 - Bobst Media 68 A II
For Production of Straight Line & Crash Lock Cartons Solid Board up to 600 g/m Corrugated Board up to E Flute Maximum Thickness of Folded Box Max 8mm Box Sizes: Straight Line Boxes Open Blank Width Min 106mm Max 680mm Open Blank Length Min 60mm Max 600mm Flat folded Blank Width ...
img
0 - Gandossi & Fossati CS95 Crash Lock Carton Gluer
Straight Line Carton Gluer with Crash Lock Maximum Width 900 mm Min folded blank 100mm Pafra APC Glue system Protek Hot melt glue system ( Nordson tank ) with 3 guns / Batch Counter Total working length 13.5 metres
img
2008 - Heidelberg Easy Gluer 100
Max width 100 cm Equipped to Produce Straight line, Lock Bottom Cartons Touch screen monitor, Pre folder, HHS Electronic gluing system Compression Conveyor
img
2015 - Omega Intro 110
Equipped to produce Straight Line Crash Lock 4 & 6 Corner Cartons Carton Aligner Prefold Section 4 & 6 Corner Section Crash Lock Section HHS Electronic Glue System 4 Channel with 3 Guns Side Glue Tank Touch Screen Computer Compression Conveyor Will Produce Standard Carton Styles: • ...
img
0 - Omega Carton Gluer
Equipped to produce Straight Line & Crashlock Cartons Electronic Glue System with 3 Guns Belt feed from bottom of pile, and feed gate with pressure claw wheel Pre-fold section Bottom left glue wheel Final closing section 2 trombone/shingling belts Full width compression/delivery belts E...
img
2005 - Prospekt Folder Gluer
900 mm Maximum width Straight Line Cartons & Crashlock Gate Fold attachment PAFRA APC cold Glue System NORDSON Hot Glue System Delivery Conveyor
img
1986 - Asahi Cartonmaster AP 1020
Max sheet Size 740 X 1,020 mm Die Cutting Size 730 X 1,020 mm Thickness 0.1 – 3 mm Corrugate Board up to 5 mm A flute Speed 6,000 SPH Max Pressure 250 Tons Stream Feeder, Front Register Lays Left Hand Pull Lay, 2 Chases, 2 Plates, Double Action Stripper, Stripping Frames, M...
img
1986 - Bobst SP 130E
MAX SHEET SIZE: 1300 X 920 mm MIN SHEET SIZE: 580 X 450 mm E and B-Flute Corrugated Board up to 4 mm Stipper Push & Pull Sidelays 5 Sets of Chase & Plate Stripping equipment
img
1966 - Bobst 1080 E
Maximum Sheet Size: 780 x 1080mm Minimum sheet Size: 295 x 350mm Speed 4,500 SPH Cutting Pressure 220 Tons Feeder Board Left Hand Pull Lay Right Hand Push Lay 6 Front Lays 2 active 2 Chases 3 plates Electronic Clutch & Brake Double Action Stripper Quantity of Bars and Pins Steel Plate De...
2005 - Bobst Speria 106 E Automatic Die Cutter
16000 – 17000 Hours, Maximum Sheet Size 710 X 1060 mm, Speed 7700 sph, Automatic Pressure 260 tons, Pile height in feeder 1400 mm, Pile height in delivery 1100 mm, Chase Changer , 1 x Embossing Chase , Micrometric adjusting for 1mm thin plate system, Non-stop feeder , 1 Preset Table , OS and OSS pu...
img
1992 - Bobst SP 102 E
Max. Size 720×1020 cm Min. Size 350mm x 400mm Cutting Pressure 250 TONS Min. Gripper Margin 8 - 14mm Thickness of Cardboard E flute, B flute, Max. 4mm thickness Max. Speed 8,000 Description E flute, B flute, Max. 4mm thickness Left Hand Pull Lay Right Hand ...
img
1997 - Bobst 104 CER Autoplaten
Maximum Sheet Size 740 x 1040mm Minimum Sheet Size: 350 x 400mm Speed: 8,000 SPH Raised 30cm Non Stop feeder Left Hand Pull Lay Right Hand Push Lay Cube Computer Control System 2 Chases 2 Plates Centerline Micrometric Adjustment Stripper with Frames Blanking station with Frames Non St...
img
1997 - Bobst 104ER Automatic Die Cutter
38,000 Hours Maximum Sheet Size 740 x 1040mm Minimum Sheet Size: 350 x 400mm Speed: 8,000 SPH Raised 30cm Non Stop feeder Left Hand Pull Lay Right Hand Push Lay Cube Computer Control System 2 Chases 2 Plates Centerline Micrometric Adjustment Stripper with Frames Blanking station with ...
img
1977 - Bobst 900 E
Maximum sheet size: 630 x 900 mm, Minimum sheet size: 295 x 350 mm, Maximum speed: 5,000 s.p.h., Maximum cutting pressure: 180 ton, Deep pile suction feeder with pre-load gates. Left side register lay 2 Sheet detector. Front register lays 4 Chases 4 Plates Stripper with top frame. D...
img
0 - Bobst SP 900 Automatic Die Cutter
Maximum sheet size: 630 x 900 mm, Minimum sheet size: 295 x 350 mm, Maximum speed: 5,000 s.p.h., Maximum cutting pressure: 180 ton, Pre Load Gates Stream Feeder Left Side Register Lay Right Side Register Lay 2 Sheet detector. Front register lays 10 Chases 10 Plates Deep Pile Delivery...
img
1966 - Bobst SP 1260 E
Bobst SP 1260E Year: 1961 Maximum sheet size: 920 x 1260 mm, Minimum sheet size: 350 x 500 mm, Maximum speed: 5,000 s.p.h., Maximum cutting pressure: 500 ton, Pre Load Gates Stream Feeder Left Side Register Lay 2 Sheet detector. Front register lays 5 Chases 5 Plates Deep Pile Deli...
img
2006 - Bobst Commercial 106
Non stop feeder with Steel Plate Left and Right hand Pull lays Double Sheet Detector 4 Front Lays Double Action stripper Cube Touch Screen Computer Chase Changer 1mm Cutting Plate Centre Line Quick Lock stripping Frame 1 Spare Chase 1 Embosing Chase Non Stop Delivery Steel Plate Delive...
img
1964 - Bobst SP 1080 E 180T
Max sheet size 780 x 1080 mm Min sheet size 295 x 350 mm Max speed 4500 SPH High Pile Stream Feeder with diecutting frames and plates in very good working order
img
0 - Heidelberg Cylinder S
Converted for Cutting & Creasing Heidelberg Suction Feeder Swing Transfer Grippers System Large Type Bed with easily access to Form Gear Rack for Synchronising Movement of Bed Chain Delivery Sheet Size Max : 540 x 720mm Gripper Margin : 8 to 10mm
img
1997 - TMZ QW 171
Maximum Sheet size 1100 x 1710 mm Minimum Sheet size 500 mm x 560 mm Vacuum Feeder Flat Bed Die Cutter Chase Plate Conveyor 300 ton pressure 4,500 sph
img
1992 - Bobst SP 102 BMA
Max speed 7500 sph Max sheet size 1020 x 720 mm Min sheet size 400 x 350 mm Steel Plate Feeder Zonal Heated Bed 2 Foil Spindles 2 Honey Comb Chases 3 Die cut plates 3 Steel Plates Non Stop Delivery
img
1991 - Bobst SP 126 BMA Hot Foiling & Embosing
Speed 5.000 s/h, Dwell System stop in pressure, Carton board max 2000 g/m2, Corrugated board max 4 mm, Sheet size min 350x500 mm / max 920x1260 mm, Cutting power 500 TON, Converting Cutting size max 880x1250 mm, Pile height Feeder max 1400mm Delivery max 1100mm, 2 x Foil Pulls, 16...
img
2008 - Miller Johannisberg 104
Size 73 x 104cm, Converted for Hot Foiling, FTB Foiling System, 6 x Heat zones 3 x Foil pulls Fully Refurbished 2008
img
2008 - Automatan EM
Automatan EM • Automatic corrugated sheet stacker • Powered outfeed conveyor (in line) • Dual Label and Dual board feed • Extended format stacker 120” x 80” (3050mm x 2030mm) The Automatan can mount spot labels so the label can be positioned anywhere on a corrugated sheet or a stitche...
img
1999 - Multilam
Maximum Top sheet size 1400 x1200mm Maximum Bottom Sheet Size 1400 x 900mm 5mm overlap all around sheet High Pile Steam Feeder Double sheet detection Corrugate Feeder Gluing Application Station Compression Station Floor space required Including Preloader & Ramps Length 11,450cm W...