1998 - Jagenberg 104-1 Crashlock 4 Corner Carton Gluer
7 Feeder Belts
Vibrator Motor on Feeder
Prefold Station
Oleary Pharma Code / Bar Code Reader Touch Screen Control
Crashlock Station
Servo Backfold Station ( For 4 Corner)
Electronic Glue System 4 Guns
Operators side Glue Tank
Computer Control
Final Fold Section
2 Trombone Belts
Counter ...
2012 - Panmer Alba 110 4/6 Corner Carton Gluer
4/6 Corner, Crashlock, Double Wall, Straight Line Cartons
Vibrator on Feeder
Pre Fold Section
Servo Controlled 4/6 Corner Backfold Station
Crashlock section
O’leary Electronic Glue System with 4 Guns
Side Glue Tank
Camera system on Trombone section with Monitor on Feeder
Computer Control
C...
1999 - Signature 110 Carton Gluer Crashlock 4/6 Corner
Straight Line, Double Wall, Crashlock, 4 & 6 Corner Cartons,
Max Carton Width: 1100mm,
Min Carton Width: 80mm,
Vibration on Feeder,
7 Feeder Belts
Pre fold Unit,
O’leary Barcode Reader
Crash Lock Section,
4/6 Corner Section with direct drive back fold hooks,
HHS Electronic Gluing ...
0 - Tunkers Handy Pack FAS 480
The packing system FAS 480 is designed for combination with gluing machines for collapsible boxes. The aim of the systems is to increase the output of the gluing machine by up to 50%.
The FAS 480 raises the imbricated boxes and directs them at a right angle for sidewise transport. The counting i...
2003 - Vega Sirio 102 Carton Gluer Crashlock 4 & 6 Corner Cartons
Straight Line, Double Wall Crashlock & 4/6 Corner Cartons
Maximum Open Blank Caton 1020mm
Minimum Open Blank carton 54mm
Maximum Folded Blank Carton 500mm
Minimum Folded Blank Carton 24mm
Maximum Blank Carton Length 800mm
Minimum Carton Blank Length 55mm
Carton Board gr/m2 180/600
Corru...
1981 - Bobst 142 E Automatic Die Cutter
Cutting Pressure 600 MN
Maximum sheet size 1420 x 1020 mm
Minimum sheet size 700 x 500 mm
Sheet - Solid board up to 2,000GSM and Corrugated up to 4mm thick
Push and Pull Lay options to suit solid board and Corrugated board
Non stop Feeder
Left hand pull lay
4 front lays
Centerline
1mm cut...
2002 - Bobst BOBST SP 104 E
ONLY 17.515 running hours
Elevated 40 CM Machine.
Pull guide OS and OOS
1-Quick Lock cutting chase
1-4 mm cutting plate
Micrometric Adjusting
-2 Upper pull-out stripping frames
-Central pull-out stripping frame
lower pull-out stripping frames
Upper and lower stripping hardware
M...
1982 - Bobst 126 E Automatic Die Cutter
Maximum Speed: 5,500 SPH
Maximum Sheet Size: 1260 x 920mm
Minimum Sheet Size: 500 x 350 mm
500 Tons Cutting Force
Steel Feeder
Digital Speed Counter
Left hand Push lay
Right Hand Pull Lay
4 Front register lays
Die Cutting Station
1 Chase
1 Cutting plate
Stripper
Stripping Frames
...
2006 - Bobst 106 E
Bobst Speria 106E Die Cutter with Stripping
Processed materials: Paper: 80 g/m2
Carton board: 2000 g/m² max.
Corrugated board: 4mm max.
Capability:
Min. sheet size: 350mm x 400mm
Max. sheet size: 740mm x 1,060m
Machine speed: 7,700 sheets per hour
Cutting force: 2.6MN (260 Ton)...
1996 - Bobst SP 102 E II Automatic Die Cutter
Maximum Sheet Size 720 x 1020mm
Maximum Speed 7,500 SPH
Non Stop Feeder
Left Hand Pull Lay
Center Line
1mm Cutting Plate
Double Action Stripper
Non Stop Delivery
1987 - Bobst 142ER
max. Speed 6000 sheets/h.
Cutting Pressure 600 MN
Maximum sheet size 1420 x 1020 mm
Minimum sheet size 700 x 500 mm
Sheet - Solid board up to 2,000GSM and Corrugated up to 4mm thick
-Push and Pull Lay options to suit solid board and Corrugated board
Non stop Feeder
Left hand pull lay
4 fro...
1988 - Bobst SP 102 CE Automatic Die Cutter
Maximum Speed 9,000 SPH, Maximum Sheet Size:102 x 72cm, Minimum Sheet Size: 40 x 35cm, Cutting Pressure 250 Tons, Raised 30cm, Non Stop Feeder, 1mm Thin plate System, Micrometric Register, Center Line, Left Hand Pull Lay, Right Hand Pull Lay, Chase Changer, Quick Lock Chase, Quick Lock Stripping Fr...
2002 - Bobst Bobst SP 102 SE
8,000 Hours,
Speed 7,500 SPH,
Maximum Sheet Size:102 x 72cm
Minimum Sheet Size: 40 x 35cm
Cutting Pressure 250 Tons
Double Sheet Detector
1mm Thin plate System,
Micrometric Register,
Center Line,
Left Hand Pull Lay
Stripping Station
Steel Plate Delivery
2001 - Bobst SP 102 SE Automatic Die cutter
Maximum sheet size : ( 1020 mm x 720 mm )
Minimum sheet size : ( 400 mm x 350 mm)
Cutting force : 250 ton metric cutting pressure
Maximum production rate : 7,500 sheets per hour
Convertible stock : .004” to .160” stock
Machine operating hours : Only 34,386 hours
Equipment details :
...
0 - Crosland CVK 1300 Die Cutter
Year 2002
Bed Size 960mm x 1380mm
Sn: 02306
Dwell Timer
0 - Crosland TVG 1680 mm Clam Shell Die Cutter
Maximum Sheet Size: 1680mm x 1160mm
Hand Fed
Dwell Function with timer
Safety Guarded
0 - Heidelberg platen
10 x 15
complete with tools and accessories
0 - Heidelberg SB
Suck/Blow Pump
2 Spare Chases
Converted for Cutting & Creasing
Heidelberg Suction Feeder
Swing Transfer Grippers System
Large Type Bed with easily access to Form
Gear Rack for Synchronising Movement of Bed
Chain Delivery
Sheet Size Max : Size : 540mm x 770mm
Gripper Margin : 8 to 10mm
0 - Heidelberg S Cylinder Die Cutter
Suck/Blow Pump
2 Spare Chases
Converted for Cutting & Creasing
Heidelberg Suction Feeder
Swing Transfer Grippers System
Large Type Bed with easily access to Form
Gear Rack for Synchronising Movement of Bed
Chain Delivery
Sheet Size Max : Size : 540mm x 720mm
Gripper Margin : 8 to 10mm
...
1999 - Iberica JRK 105 Stripping & Blanking
Maximum sheet Size 720 x 1050 mm
Non Stop Feeder with Steel Plate
Left Hand Push Pull Side Lay
Right Hand Push Pull Side Lay
Digital Speed Clock
Center line
Die Cutting Station
1 Spare Chase & Cutting Plate
Stripping Station
Blanking Station
Spare Set Blanking frames
Support Sheet Inter ...